 |
||||||
 |
||||||
 |
||||||
 |
||||||
  |
||||||
 |
||||||
 |
||||||
 |
||||||
  |
||||||
 |
||||||
 |
||||||
 |
||||||
 |
||||||
  
|
||||||
 |
||||||
| The Colonnades | |
 |
 |
|
Completed Installation |
|
| The installation is about to begin at the Colonnades Condominiums, located directly on the beach in Alabama, and the project managers take time to pose for a picture before the work begins. |
 |
 |
Here we see the pool before the installation process starts |
| Here is a profile view of the area the Roll A Cover will be installed on. |
 |
 |
The pieces of the enclosure have been taken off the truck and are brought to the base of the deck. |
| This picture truly shows the grand scope of this job and the sheer size of the building this enclosure will be on. |
 |
 |
The bays are beginning to be lifted and are being put into place to be hoisted by crane, onto the deck. |
| Ladders are put into place to allow the installation staff easy access to the track that the Roll A Cover will roll on |
 |
 |
The side wall here is being put into place and secured by a high impact, heavy duty gusset. |
| The gusset is slid into place... |
 |
 |
...and securely snapped into the side wall |
| The crane has arrived to lift the bays up onto the deck for the installation team. |
 |
 |
More bays are lifted and positioned for the enclosure by the installation staff |
| Another bay is being ready to be attached to the side wall |
 |
 |
The roof and the wall sections are snapped into place and secured with the gusset |
| A look down from the top of the building below |
 |
 |
The crane has been put into action and starts to lift the bays up to the deck |
| Up up and away the crane goes lifting the bays |
 |
 |
Another bay is lifted up to the deck section for the install team |
| Kevin, one of out plant supervisors secures the bay to the track it is lifted by the crane |
 |
|
|
Kevin takes a moment to pose on the beach |
| More sections of the enclosure are lifted by the crane |
 |
 |
The enclosure is starting to take shape as bays are fixed to the side wall. |
| Three bays have now been installed and the telescopic nature of the enclosure is starting to take shape |
 |
 |
The enclosure is checked for stability by the installation team and all parts are verified to be working correctly |
| Yet another bay of the enclosure is listed up for the installation team |
 |
 |
The bays are installed and retracted to test the full working range of motion of the enclosure |
| This is a close up view of the track system on the wall that allows the lean to unit to roll with ease |
 |
 |
The track is securely bolted into place and the levelness is ensured |
| Here is a profile view of the side wall as the enclosure is being put into place |
 |
 |
The side wall is now completed |
| The other side wall is having some finishing touches added |
 |
 |
Here we see a top down view of the enclosure as it is almost entirely completed |
| The enclosure is now completed and we see it in its open state |
 |
 |
and now we see it closed |
| A beautiful view of the side wall from the ground looking up |
 |
 |
Here is a spectacular view of the inside of the enclosure as it is opened to enjoy the beautiful view of the beach |
| The same view from the other side the enclosure |
 |
 |
The pool has now been filled and the enclosure is opened for all of the condo owners to enjoy |
| The inside of the finished pool area with the enclosure closed. |
 |
 |
And finally we get to see yet another top down view of the unit after being fully decorated. |
